Archives 2014

Qosmotec’s Car-to-X test system headlines ATZ Elektronik’s december issue

ATZ_Titel-DATZ Elektronik, one of Germany’s leading automotive special interest magazine, has an in-depth report on the Car-to-X adaption of QPER as cover story in its december issue. The article gives a detailed account of Qosmotec’s approach to employ signal-strength emulation to run virtual drive tests in the lab and the extension to a full test bench setup for Car-to-X test laboratories.

Additionally, ATZ offers an insight into Qosmotec’s current R&D activities in co-operation with RWTH Aachen University. These are aimed at developing channel models to predict signal strength exactly in specific locations, based on real building data and traffic situations.

ATZ Elektronik’s current issue is available online, where you find the German version of the article.

You find an English version at

For further information on Qosmotec’s Car-to-X test system go to:

Successful debut for Car-to-X test systems

C2C-Forum2014It had something of a premiere: For the first time Qosmotec officially showcased its test bench setup for Car-to-X communication testing. At the 8th Car2Car Forum at Stadthalle Braunschweig we had built up our 5-port QPER system with two IEEE 802.11p capable radio modules communicating with each other via a radio link, on which signal strength was controlled by our emulation software. Additionally, the two modules were controlled via the CANoe software from Vector Informatik. “Last year at the Car2Car Forum in Munich, we planned to establish this co-operation with Vector. At this time, we did not even have the slightest idea, whether those to systems really fit together. All the more proud we are that we could demonstrate a fully integrated environment, executing several typical traffic scenarios like emergency break situations, slow vehicle warnings or communication between cars and infrastructure like traffic lights, only eleven months later ”, says Qosmotec’s Managing Director Mark Hakim.

The demonstration attracted many of the 250 congress participants, who appreciated to see a complete example for a hardware-in-the-loop test benches on our booth. Together with car manufacturers and vendors of radio equipment, we identified an important application case, that shall be followed up in the near future. “We want to proof the negative impact of WLAN noise from IEEE 802.11ac and 802.11n on the Car-to-car communication”, says Mark Hakim.

Besides to this setup we showed a first concept, how to extend interoperability tests with other signal propagation effects like Doppler and Multipath fading. Also we specified on the congress, how to support the ETSI Plugtest, that will be hosted by TASS international in March next year in Helmond, with Qosmotec test equipment.

Download Qosmotec’s presentation posters:

Poster Car-to-X Communication Test Bench

Poster Virtual Drive Test in the Lab

Qosmotec at 8th Car2Car Forum 2014

DruckQosmotec presents its new test bench set-up for Car-to-Car Communication. It is a combination of our signal strength emulator QPER-C2X and Vector’s CANoe software offering a perfect platform for for automised tests in labs under real RF conditions.


October 21st and 22nd 2014


At the 8th Car2Car Forum at Stadthalle Braunschweig, Germany

The Car2Car Forum is the Car2Car Consortium’s (C2C-CC) annual congress. C2C-CC is a nonprofit organisation of European vehicle manufacturers and equipment suppliers, dedicated to the objective of further increasing road traffic safety and efficiency by means of co-operative Intelligent Transport Systems (C-ITS) with Car-to-X Communication.

Qosmotec’s managing director, Mark Hakim, and Ferdinand Schuber, Head of Sales, will showcase the new test system and examples of use.

We are looking forward to meet you in Braunschweig.

Learn more about our test system for Car-to-X communication at

Virtual Drive Tests for Car-to-Car Communication

1 - Car2Car Communication Prinzip

A country road and a blind bend ahead – what if there are road works behind the curve or a vehicle has broken down? Most motorists wish they could be warned, if there is a pontential hazardous situations ahead. Car-to-car communication technology aims address this issue by ensuring vehicles are warned or warn the other traffic in potential dangerous situations, even allowing cars to react automatically. Nearly every OEM in the Automotive sector works on this technology.

Even though vehicle manufacturers have agreed on standards and specifications for communication between vehicles spanning all brands, Car-2-Car technology still lacks a reliable, reproducible automated test methodology. Potential weaknesses and malfunctions have to be detected and resolved in the test lab, before the new technology can be deployed in the field.

Adapting QPER to the needs of Ad-hoc networks in Car-2-Car Communication

3 - Screenshot QPER C2C_12cm

Arbitrary traffic scenarios can be created with a few drag & drop actions. Radiation patterns are taken into account for calculating the signal strength between vehicles and setting them on the attenuators.

Qosmotec aims to solve this issue. Together with RWTH Aachen Universtity and Vector Informatik we develop a signal strength emulator for hardware-in-the-loop (HIL) test facilities in the automotive industry. This poses a challenge, because public mobile networks and Car-2-Car technology have different parameters. “In Car-2-Car communication we are dealing with Ad-hoc networks”, explains Qosmotec’s Managing Director Mark Hakim. “This means there is no distinction between fixed base stations and mobile subscribers. All devices communicate directly with each other while they are moving. They also assume different roles, e.g., message broadcaster, router or mobile receiver.” For this ad-hoc network emulation, a new hardware setup had to be developed with configurable radio links between all network participants. Currently Qosmotec works on traffic and channel models that simulate driver behavior and resulting radio propagation impacts on the communication channel.

Qosmotec co-operates with the Institute for Theoretical Information Technology at RWTH Aachen University. They focus on propagation models based on real building environments, based on an approach derived from ray tracing. “This allows predicting signal propagation for drive tests through actual streets. A huge step for Car-2-X technology, as conducting virtual drive tests in the lab keeps the required resources to a reasonable amount,” says Mark Hakim.

Joining CANoe.Car2X and QPER to provide reproducible drive tests for Car-2-Car Technology

2- Verkehrssituationen

Day-One applications for Car-2-X communication: Improving saftey by warning the driver in case of critical situations, e.g. roadworks, emergency breaks, traffic jams, crossings, approaching or slow vehicles and obstacles. All these situations can easily be created in the lab with virtual drive test software.

Besides propagation models, there is another challenge: “Our approach is based on our propagation effects replicator QPER which is designed to model the air interface but not to control the wireless equipment involved”. Here, Vector comes into play. Its widely-used software CANoe to develop, test and analyze electronic control units (ECU) has been extended by a new component CANoe.Car2X. It can handle the WLAN 802.11p protocol and the ETSI specified messages for cooperative awareness and decentralized environment notification and allows controlling On-board Units (OBU) and Road-Side Units (RSU) as well as simulating them. Qosmotec and Vector have joint forces to combine their tools. GPS-Positions simulated in QPER are transmitted by CANoe to the EBUs involved. “By joining CANoe’s Car-2-X extension with the air interface simulator QPER, we provide the necessary test set-up to enable testers to run virtual drive tests in their lab”, says Hakim. Testers can emulate traffic and infrastructure, and model user behavior. Standard scenarios, like road works, slow traffic or crossroads with restricted visibility are supplied. This enables engineers to check whether the technology reacts as required and brings Car-2-Car technology a step closer to market. First results of this joint development will be presented at the Car-to-Car Forum that is taking place in the town hall of Braunschweig on October 22nd / 23rd 2014.

Research and Education at Qosmotec


The seal of quality for innovative research

Germany has a fairly good reputation as research location and is famous for its dual education system that combines practical apprenticeships with vocational training. For both areas, Qosmotec is a good example, how research and education are integrated into a company’s workaday life.

There are about 3.5 million enterprises in Germany, but less than one percent of them participate actively in research activities. This figure has been found out by the Stifterverband für die Deutsche Wissenschaft. Qosmotec belongs to this small group and was recently awarded the seal of quality “Innovative through Research” for their contribution to industrial research activities. It is actually surprising that the portion is so small compared to Germany’s standing in the world. “Apart from Chemistry, Pharmacy and Medicine Technology, most research is done at universities and only leaves them, when scientists and academics found spin-offs, because they believe, that they can commercialize their results”, says Qosmotec’s Managing Director Mark Hakim.


The German Ministry of Economics encourages research cooperations of small and medium sized enterprises with universities with public fundings

Research co-operations to improve Qosmotec’s test systems

Qosmotec has gone a completely different way. “We are not an academic spin-off. Our complete management team already had years of experience in other companies, before we started Qosmotec in 2004”. It became soon obvious, how much more could be achieved, if research results and promising ideas would drive the development, rather than just reacting to customer demands. We got in touch with the institute for theoretical information technology at RWTH Aachen University, who do research on signal propagation models. “This was a fantastic add-on to our signal propagation emulator QPER. We found a way to make good use of their research results and integrate them into our simulation software”, explains Mark Hakim the co-operation. In the end  it turned out to be a perfect synergy as Qosmotec could took over the part of the practical implementation of research results. For these activities we could make use of public funds that support those kind of co-operations several times. “The number of enterprises, who would like to do some co-operations of this kind is much higher than those, who actively do them. The reason for this is, that research seems too much theoretical on the first glance and people either do not know how or are afraid of the effort to use them practically”.

Dual education guarantees well trained employees and brings input for new products


Apprentices at Qosmotec are trained on the job and study for a BSc degree in parallel to their work

The tasks that Qosmotec deals with are also challenging enough for writing a bachelor or master thesis. Therefore, Qosmotec is able to offer very attractive apprenticeships for A-level degree students that cannot be found so often in Germany: Our young employees, who become Mathematisch technische Software Entwickler, are educated as application programming engineers by Qosmotec and study in parallel Scientific Programming at the University of Applied Science in Aachen. After three years, they write their Bachelor Thesis in Qosmotec. “We always find a subject which also pushes our test systems”, guarantees Mark Hakim. For example, the test automation app Qosdroid which is now an important application within the LTS platform, has originally been initiated by a such a student project. Since 2008 we have been qualifying six students through an apprenticeship. By now, all of them have become regular employees at Qosmotec. But it is also possible to continue studying in an additional master degree program – for example becoming a master in software engineering.

Next week, in the last article of our jubilee-series, we present a current new research activity in Qosmotec: The development of a signal strength emulator for the upcoming Car-2-Car Communication. This activity combines both aspects mentioned above: It is another research project where the Technical University is involved and it offered enough possibilities for student projects and bachelor thesis’s.

Lab Testing Without Owning a Test Network

Box-rechteckNowadays, many services are based on wireless networks, where the service provider is not owner or operator of the mobile network. The most popular examples are Virtual Network Enablers and Operators. They offer very attractive subscription models for usage in specific foreign countries and other value added services. Their testing process is typically very difficult, because they need to verify their services in various networks. It gets really tedious, when the tests have to involve international roaming from one country to another. Exactly for these purposes, Qosmotec has invented the Network in a Box – a combination of a freely configurable mobile network (consisting of core and radio network part) and a handover emulator.

Freely configurable radio part

The radio part of the mobile network emulator consists of signal generators specifically for GSM 900/1800, UMTS Band I and LTE Band 7 (2600 MHz). Each signal generator can be configured with all relevant cell parameters like Mobile Country Code (MCC), Mobile Network Code (MNC), Location Area Code (LAC), Cell Id and Frequency (ARFCN) and then creates a correctly modulated signal that is detected by any mobile phone. “With two, three or four cells, you can simulate the local situation in any country, emulating various network operators or in a border region, emulating networks in different countries”, explains Qosmotec’s Managing Director Dr. Dieter Kreuer, who has developed the concept of configurable mobile network for test laboratories. Configuration time for switching a cell to a completely new configuration is 15 – 20 seconds. “Most probably the quickest way to get a bit of vacation feeling, when you see the name of a caribean mobile network operator on your phone”, says Dr. Kreuer with a smile on his face.


The Home Location Register (HLR)

Your mobile phone recognizes the emulated cell in the network search. To be able to register to the emulated network, the SIM card must be added to the Home Location Register (HLR) that belongs to the emulated core part. During network search, the phone sends its IMSI number which can be added to the HLR. Thus, an administrator can maintain the test network and make sure, that no uncontrolled registrations occur.

Test with all functions and services of a public mobile network

Once registered, the mobile phone can use all  services of a normal mobile network. Above all, testers can influence on the mobile network behavior and therefore act like a real mobile network operator. He can establish network generated calls, can let the mobile network send SMS messages or influence the quality of a data transmission by setting packet delays or packet losses separately on the uplink and on the downlink. And he can freely configure USSD services – from simple subscriber requests up to complex interactions between subscriber and operator. “For virtual network operators, this is the most important test functionality, because most of their value added services on SIM cards are based on textual communication with the network”, says Dr. Kreuer.

Handover emulation and mobility simulation enable international roaming tests


The QPER software displays in which cell a mobile device is registered and which services are in use

The combination with Qosmotec’s field strength emulator QPER, that emulates the subscriber’s mobility in the wireless network, makes the network emulator now a real mobile network in a box.. The neighborhood of cells can be set as a part of the cell configuration,. Dr. Kreuer knows, what this is good for: “If two cells are linked together as neighbours, a handover between them is possible, while otherwise the network connection would be completely interrupted, when the mobile changes the cell”. With this capability, the emulated cells can supply input for a handover matrix consisting of digitally controllable attenuators, and the mobile phones on the other side of the matrix can see several cells with user controllable strength and move between cells or roam between countries.

QPER Test Bed + LTE

The schematic setup for the emulated network: the radio part is available for all technologies from 2G to 4G

The control of the complete emulated mobile network is smoothly integrated into the QPER virtual drive test software. Having preconfigured the cell parameters, they are set on the signal generators by simple drag & drop actions and it is clearly visible, when they are activated. Users can see, which mobiles attempt to register to the network, when they have been successful and what type of link they have (circuit switched or packet switched; GPRS, EDGE, 3G HSPA or LTE data transmission).

Having such a flexibly configurable mobile network in your lab always makes sense, when testing interoperability of services that have to work in other countries. Typical application cases are

  • Multi-IMSI applications, where a mobile shall follow a dedicated price plan in foreign countries, that is identified by the used IMSI number,
  • Toll Collection, that has to begin and end at the country’s border
  • Intelligent Transport Services applications that go via 3G and 4G, where the driver shall be able to rely on internationally.



Qosmotec rewarded for research activities


Qosmotec has been awarded the seal of quality „Innovative through Research” by the Stifterverband für die Deutsche Wissenschaft, a business community initiative promoting science and education. The Stifterverband honors companies that do active research as part of their business with this seal of quality . “In Germany there are 3.5 million enterprises, but only less than one percent participates in research – an extremely important group. Because only those who research are able to discover something new and create innovation and growth”, says the association on its webpage.

Qosmotec belongs to this small percentage. “We benefit from our close relationships to the University of Technology and the Academy of Applied Science in Aachen”, says Qosmotec’s Managing Director Mark Hakim. The current big research project that we are working on in co-operation with the chair for theoretical information technology is about developing radio propagation models for the Car-to-Car communication technology and applying them on our signal strength emulator QPER. This research project runs over one year and is funded by the German ministry of economics. “These kind of big projects, that we have done in a similar way in the past for other development areas, are of course highlights of our research activities. But apart from that, we offer regularly bachelor as well master theses to our apprentices and students”, explains Mark Hakim, how Qosmotec contributes to the education of young academics.

The seal of quality “Innovative through research” is valid for two years. More information can be found at

The challenge to test with smartphones

Qosdroid_kleinWhen Apollo 11 took off in July 1969 to conquer the Moon, a computer, much less powerful than an Android smartphone today, supported the flight into space. While using a smartphone is not exactly rocket science, their capabilities are still challenging enough for mobile networks. Therefore, network operators want and must employ phones that they recommend to their subscribers in their end-to-end test process. This allows them to test their complete portfolio and ensure all services they offer run flawlessly in their live networks.

However, integrating UEs into an automatic test system may turn out to be a pitfall for engineers. Especially, as smartphones are not designed for automated control and therefore, most features cannot be controlled over conventional interfaces. “Some features can only be accessed via the OS. This includes very basic features, for example the flight mode, which is important to detach UEs from network. Still all these functions have to be tested in end-to-end tests and therefore must be executed in LTS”, says Qosmotec’s managing director Dr. Dieter Kreuer.

Test Automation App replaces the AT interface

However, with smartphones becoming more and more common a solution had to be found. Qosmotec’s development team concluded that this provided an opportunity to tackle two problems at once:

With Qosdroid, immediately all vendors and all models based on Android operating system are supported by LTS

With Qosdroid, all vendors and all models based on Android operating system are supported by LTS

1. Finding a sustainable solution to integrate smartphones into LTS to ensure comprehensive end-to-end tests for all phone models on the market.

2.  Gaining independence from individual telephone hardware, an issue since Qosmotec’s founding days.

They came up with a Test Automation App to control smartphones using an Android OS, Qosdroid. “We were getting nowhere with AT interfaces. So we decided to take advantage of the fact that a smartphone is a small computer and use the OS to get access to all features,” says Dr. Kreuer about the strategy behind Qosdroid.


Tests run directly on the smartphone

This also simplified the LTS system architecture. While for controlling phones via AT-commands a separated control computer (the so called Mobile Control Server MCS) is a mandatory system component, the test automation app can be installed on Android smartphones from all vendors and allows users to run LTS test cases directly on the smartphone. “Once the app is installed it can execute LTS test cases directly on the phone via the Android OS”, explains Dr. Kreuer.


Smartphones with Qosdroid are directly controlled by the LTS Application Server. A separate system component controlling UEs became obsolete

“This means we gain access to all features from a user perspective. A tester can design and execute test cases for live networks in which he employs features like apps or video communication, which are not accessible on smartphones via conventional interfaces. So network operators can ensure their complete portfolio runs in their network.”

While this solved the issue how to integrate smartphones into LTS, Dr. Kreuer highlights the independence from telephone hardware gained through Qosdroid: “It makes us and our customers much more independent from telephone hardware. It is very much plug and play. Qosdroid basically just needs an Android OS regardless of model and manufacturer. One no longer needs to check whether a new phone-model is compatible with the test automation system. We avoid a potential pitfall: integrating new hardware in a test automation system. Our customers can run end-to-end tests with new models once they are available”.

Last not least Qosdroid enables testers to take advantage of each attached UE’s processing capacity. This means the number of test UEs in LTS can be scaled up without additional backbone processing power. “Users can attach as many smartphones as they like and extend their existing test systems without any alteration of their set-ups”, summarizes Dr. Kreuer.


Testing without RF Disturbances – RF Guard

Space saving individual shielding: Up to 8 RF Guards fit on a rack shelf.

Space saving individual shielding: Up to 8 RF Guards fit on a rack shelf.

First, it seemed like a crazy idea that Qosmotec should have its own shielding box in the portfolio. There are so many ways to protect mobile phones from external RF disturbances: Variants with plenty of mechanical opening mechanisms, with meshes on top or on the side for visual inspection and manual intervention, in ergonomic designs, in sizes from a small freezing compartment to a whole fridge … Why should Qosmotec design one of its own?

RF shielding fitting the demands of test automation

The reason is simple: None of the tools mentioned are appropriate for test automation purposes. None of the existing solutions fulfilled the following requirements:

  • Space-saving, so that a high number of UEs can be kept shielded individually for example in a rack
  • Software accessible, so that all interfaces can be interrupted or restarted automatically to ensure stability of an automatic test run
  • Cost-effective, so that individual shielding of each UE stays affordable.

Our first shielding box was manufactured in 2011 and was with 16 cm length and 11 cm width primarily made for datasticks.

Two SMA connectors lead into the box, so that it can also be used for MIMO tests. “Our vital contribution to RF shielding in combination with test automation is our software controllable USB circuit”, explains Qosmotec’s technical director Axel Voigt the uniqueness of this box. “We have written a little software application that can interrupt each USB port individually. This is necessary, if during an automatic test run a situation occurs, where a UE needs to be removed from the USB port and plugged in again – a situation that can never be excluded when working with commercial UEs, especially, if they are brand-new or even still under test for market introduction”. This software is available as a GUI for Windows as well as an API for Windows and Linux, so that it can be very flexibly used in any environment. Of course, it is an integral part of our Mobile Network Tester LTS.

From a simple accessory to a stand-alone product 

While the shielding boxes were originally planned to be used only in LTS, the concept recieved surprisingly great feedback, so that Qosmotec decided to offer them also independently from our system under the name “RF Guard”. Very soon, new box sizes were needed. While an IPhone or a Samsung Galaxy S2 still fitted into a box, the later upcoming 5 inch smartphones could hardly been squeezed into one. So we slightly extended the length to 20 cm and provided a 90° angled USB cable to save space on the connection. As an optional extension, we provided interfaces to feed the phone with 12 V power to charge the battery in parallel to testing and to operate the mobile’s power button.

RF Guard is available in different sizes to test larger UE such as tablets

The new version for larger UEs: Desgined for tablets, routers and UE prototypes that do not have their final form factor. It also supports control via Ethernet.

Boxes for UEs of all shapes and sizes

Meanwhile, even a bigger box is available. With ground dimensions of 30 x 30 cm and a height of 17,5 cm, still two of them can be mounted on a rack shelf consuming  4 U in the rack. These boxes are also equipped with an Ethernet Interface, absorbing foam inside, and have 4 RF connectors, so that 4×4 MIMO can be tested inside. “Actually, this size breaks our original concept of a tiny box. But this adaptation was not that complicated to realize in the end and now fulfils also the demands of our users, who want to test with tablets, routers or prototype developments that have not reached their final form factor”, says Axel Voigt.

Ongoing developments: Battery charging and USB 3.0

New developments on the shielding boxes are already ongoing. For example, a lot of testers have struggled with smartphones not charging fast enough, when using a USB cable for data connection. Therefore, tests might interrupt after a certain time, because the battery is empty. The reason for this is, that a USB connection to a computer charges with only 0.5 Ampere, but might consume more, especially when it reaches high data rates. Original vendor chargers can provide a higher charging power, but normally it is not possible to use both in parallel. Qosmotec has now overcome this problem and develops a circuit for the shielding boxes that enables to use the data connection to a computer as well as original vendor chargers in parallel.

The demand for a USB 3.0 interface is rising. “Normally, high data rates through the interface in the box and effective shielding are excluding each other”, explains Axel Voigt the problem on these technologies. Nevertheless, Qosmotec is working on this technology to provide a satisfying solution also for this. This makes obvious in the end, that it was not such a bad idea to work on our own shielding boxes.

IREG test automation: remote UEs, central SIMs


In the late 90s, it seemed to be a sort of magic to make a mobile phone ringing without typing the number of the recipient explicitly on the keypad of another phone. At the GSM World exhibition in Cannes (today’s Mobile World Congress, which has been moved to Barcelona), an exhibitor even had a magician at his booth to impress visitors with this kind of trick. “It is not illusion, it is technology” said the magician at the end of his show.

Central test lab – probes with UEs in the live network

What could fascinate visitors to a fair about 15 years ago was nothing else then a computer controlled modem making a call. This is the principle, up on which Qosmotec’s functional test system LTS-F is based. A compact computer board controls up to 8 modems. All this is put into a 19 inch chassis and such a test probe can be placed anywhere, where power supply and an internet connection is available and can execute test cases in live networks without the presence of an operator. The remote probe, or even a whole bunch of them, can be controlled from a computer at a central location and the executed steps, taken measurements and achieved results are logged, gathered and analyzed there. “This is extremely helpful for executing international roaming tests, much better than sending staff in all kinds of countries, where tests shall be executed”, explains Qosmotec’s technical director Axel Voigt. “Just the UE chassis needs to be shipped and plugged in and will automatically get into contact with the central control unit.”


Test probes with industrial modems allow tests in live networks controlled from a central location

Industrial modems instead of commercial handsets

Axel Voigt and his team have vastly extended the features and capabilities of the remote probes over the last years. “The reason, why we use industrial modems inside the probes instead of commercially available handsets is not merely a matter of compactness and construction, it is because of the test results that we want to provide our customers. These modems are made for remote control purposes and allow to extract information that the user would typically see on the display of his phone. This approach is much more effective than using complex techniques like image or voice recognition.” Modems for all kinds of mobile technology are available, covering all relevant frequency bands for 3G and 4G in Europe as well as America and Asia. Also American CDMA and EV-DO standard are supported.


The SIM array provides the platform for international roaming tests. Up to 13 SIM boards can be plugged into one rack.

No simulation, no modification, just mapping of SIM cards

It makes the remote tests even more convenient that the modems do not necessarily need to be equipped with SIM cards before shipping the remote unit. All needed SIM cards can be kept together in a SIM array with the LTS central control unit and can be mapped via software before test starts. This reduces planning effort for test execution as well as the amount of modem equipment needed drastically, because the same mobile can work sequentially in various operators’ networks without any physical interaction. This is the basis for the full automation of IREG test cases.

LTS Functional Tester enables testers to run remote controlled tests with UE tests probe spread over several countries

LTS-F enables testers to run remote controlled tests with UE test probes spread over several countries

Though it is just a very simple concept of spatial separation from the hardware components mobile and SIM cards, it is sometimes really difficult to explain, what it does. “Very often, people think that very mysterious things happen when transmitting the SIM card information to the modem”, tells Axel Voigt about serious misinterpretations that he has already been confronted with.Schmetterling_SIM But there is no simulation of a SIM card, nor is there any modification of the information on the SIM cards. A picture that we really like is the representation of a SIM card in form of a butterfly, symbolizing that the SIM is flying from one location to another. The only prerequisite is a stable internet connection between central unit and remote probe.

IREG test automation is one of the most important applications of LTS-F. Qosmotec can provide ready-to-use test sets for IR24, 35 and 60 specifications. But LTS-F is also very intensively used by Virtual Network Enablers and Operators (MVNEs and MVNOs). They use it for functional tests in those countries, where they are offering their services and just need to send a probe there, while they can execute all tests from their respective headquarters.