| |
| Lab Test System - Field
Adaptation |
| |
| Sample Applications |
 |
Perform
fully automated roll-out testing
When rolling out a new network software release,
check the complete functionality on-site remotely
from your operation & maintenance centre. |
|
Monitor
network performance & service quality
With probes distributed over the field network,
run ongoing service access tests to be immediately
alarmed about disruptions & impairments. |
|
Supervise
network health
Even in idle mode, LTS-F can monitor layer 1 information
such as received signal and quality levels of
all reachable cells, and send alarms in case of
outages. |
|
Perform
inbound and outbound roaming tests
Furnishing LTS-F with a SIM card server, virtually
transfer SIM cards physically located in your
office to any LTS-F probe location, domestic or
abroad,
and check the functionality of your or your roaming
partners' SIM cards. |
|
Check
network coverage
Have mobile LTS-F probes roam through the network
in trains or buses to determine signal as well
as service availability / quality levels across
their tracks. |
|
Benchmark
against competitors
Find out yourself on site how your network compares
to other networks in range. |
|
Test
handsets remotely
Assess different mobile types in the field;
Handset-manufacturers can remote-test mobile software
on prototypes in lab or field networks overseas. |
|
| |
| Characteristics |
|
Centralised,
unattended, proactive testing
Probes can be controlled from central O&M
offices;
scripts or new software can be up-, results downloaded. |
|
Autonomous,
coordinated tests
Probes operate autonomously once scripts are uploaded;
coordinated test execution among multiple probes
by time synchronisation. |
|
Up
to hundreds of probes in multiple regions
LTS-F systems can be partitioned into several
independent regions; central control and access
still possible. |
|
Universally
reachable via radio links
Probes can be installed anywhere in the network
where power is available. WAN/WiFi connections
allow higher bandwidths. |
|
Mobile
probes with GPS localisation
For unattended drive tests; full remote control
of test operation and permanent access of results
in real-time. |
|
Alarm
functionality
Automatic alarming via e-mail / SMS triggered
when user-definable failure thresholds are exceeded. |
|
Supports
all mobile network technologies
Various GSM, GPRS, EDGE, UMTS, CDMA terminals;
also supported are PCMCIA datacards, e.g. HSDPA. |
|
Remote
mobile reset
Reset / restart capability for all mobile types. |
|
Fully
compatible with Qosmotec LTS
LTS-F shares its graphical user interface, test
scripts, test script editor etc. with LTS; it
is possible to re-use LTS scripts in LTS-F, or
set up a hybrid system with lab-based terminals
and probes in the field. |
|
| |
|
|
| |
|
|
| |
|
| LTS - FIELD ADAPTATION |
|
|
 |
|
| |
| DOWNLOAD |
|
|
|
|
| |
| PRODUCTS |
|
|
|
|
| |
|
